ABB OT63F6 Switch-Disconnector

ABB OT63F6 Switch-Disconnector  Specifications:

• Product Type: Switch-Disconnector (Non-Fusible Disconnect Switch)
• Manufacturer: ABB
• Model: OT63F6 (Product ID: 1SCA105379R1001)
• Device Application: Isolation, manual switching, and disconnection in low-voltage circuits (e.g., power distribution, motor control centers)
• Poles Description: 6P (6 poles)
• Rated Operational Current AC-21A (Ie):
  • 63 A at 380–415 V
  • 63 A at 500 V
  • 63 A at 690 V
• Rated Operational Current AC-22A (Ie):
  • 63 A at 380–415 V
  • 63 A at 500 V
  • 63 A at 690 V
• Rated Operational Current AC-23A (Ie):
  • 63 A at 380–415 V
  • 45 A at 500 V
  • 20 A at 690 V
• Rated Operational Power AC-23A (Pe):
  • 11 kW at 220–240 V
  • 22 kW at 400–415 V
  • 22 kW at 500 V
  • 15 kW at 690 V
• Conventional Free-air Thermal Current (Ith): 63 A at 40 °C
• Conventional Thermal Current (Ithe): 63 A (fully enclosed)
• Rated Operational Voltage: 750 V AC (main circuit)
• Maximum Operating Voltage UL/CSA: 600 V AC
• Rated Insulation Voltage (Ui): 750 V (IEC/EN 60664-1)
• Rated Impulse Withstand Voltage (Uimp): 8 kV
• Rated Conditional Short-Circuit Current (Inc):
  • 50 kA with 100 A fuse at ≤415 V
  • 100 kA with 100 A fuse at 500 V
  • 50 kA with 80 A fuse at 690 V
• Rated Short-Circuit Making Capacity (Icm): 1.4 kA at 690 V
• Rated Short-time Withstand Current (Icw): 1.5 kA for 1 s
• Power Loss: 2.8 W per pole at rated operating conditions
• Operating Mode: Front operated
• Handle Type: Knob handle (handle and shaft not included)
• Mounting Type: Base mounting, DIN-rail mountable
• Position of Line Terminals: Top In – Bottom Out or Bottom In – Top Out
• Connection Type: Screw terminals with protected clamp
• Cable Cross-Section:
  • Flexible with Ferrule: 1 x 1.5–4 mm²
  • Solid: 1 x 1.5–6 mm²
  • Flexible: 1 x 1.5–35 mm²
  • Stranded: 1 x 1.5–35 mm²
• Wire Stripping Length: 10–12 mm
• Tightening Torque: 2 N·m (IEC 60947-1); 18 in·lb (UL/CSA)
• Recommended Screw Driver: Pozidriv 2
• Degree of Protection: Front IP20 (IEC 60529)
• Pollution Degree: 3
• Mechanical Durability: 20,000 cycles
• Ampere Rating UL/CSA: 60 A
• Horsepower Rating UL/CSA:
  • Single Phase:
    • 2 Hp at 110–120 V AC
    • 7.5 Hp at 240 V AC
    • 15 Hp at 440–480 V AC
    • 15 Hp at 550–600 V AC
  • Three Phase:
    • 15 Hp at 220–240 V AC
    • 30 Hp at 440–480 V AC
    • 30 Hp at 550–600 V AC
• Standards Compliance:
  • IEC 60947-3
  • UL 508
  • CSA C22.2 No. 14
• Product Certifications: CE, cULus, RoHS (EU Directive 2011/65/EU and Amendment 2015/863), REACH, TSCA
• Special Features:
  • Compact design for space-saving installation
  • Visible contacts for safety (for 100 A and above, applicable to series)
  • Modular design for faster installation and accessory compatibility
  • Knife contact solution for low power loss and heat
• Dimensions:
  • Width: 105 mm
  • Height: 91.5 mm
  • Depth/Length: 84.5 mm
• Weight: 0.6 kg
• HS Code: 8536.50.80 
• Country of Origin: Finland