Liigu sisu juurde
12 Months Warranty 12 Mo. Warranty Order Today = Shipped Today Shipped Today Over 15.000+ Satisfied Clients 15K+ Clients
Liigu edasi toote teabe juurde
1 7
Endress+Hauser

Endress+Hauser Nivotester FTW325-A2A1A Conductive Level Switch

Endress+Hauser Nivotester FTW325-A2A1A Conductive Level Switch

€163,35incl. VAT
€135,00 excl. VAT

Laoseis: 2

Tested & workingReally in stockWorldwide shipping12-month warranty
Ships from our own warehouse in Veen, the Netherlands
Order before 16:00 CET — shipped the same day
Worldwide shipping with track & trace
Questions? Contact our team
GearProduct description & specifications
BrandEndress+Hauser
ModelNivotester FTW325 Series
Part NumberFTW325-A2A1A
TypeConductive Level Limit Switch for Liquid Level Monitoring
Technical Specs
Core ApplicationConductive point level detection, overfill prevention, pump dry-run protection, and two-point level control of conductive liquids in storage tanks and process vessels.
Order Code Structure (A2A1A Breakdown)
AApproval: Non-hazardous area (Standard / CE)
2Housing: Rail mounting, 22.5 mm width, IP20
APower Supply: 85 to 253 V AC (50/60 Hz)
1Input / Channel: 1x Channel
AOutput: 1x Relay output
Operating PrincipleEvaluates the electrical resistance/conductivity between probe electrodes and the conductive vessel wall (or reference electrode) using low-frequency AC measuring voltage.
Power Supply Range85 to 253 V AC (50/60 Hz)
Power Consumption2.0 W / 4.5 VA max.

Connected Sensor / Probe Inputs: Compatible with Endress+Hauser conductive probes

Measuring Circuit Voltage / Current: Approx. 10 V AC, < 2 mA

Sensitivity / Threshold RangeAdjustable sensitivity via front potentiometer
Output Relay Contacts1 x Potential-free SPDT / CO changeover contact
Relay Switching Capacity
ACMax. 250 V AC / 2 A / 500 VA (cos φ ≥ 0.7)
DCMax. 40 V DC / 2 A / 80 W
Operating Fail-Safe ModesSelectable MIN or MAX safety logic
Status & Diagnostic LEDs
Green LEDPower ON / Supply voltage state
Yellow LEDRelay output status (Level state)
Red LEDFault / Cable break / Short circuit alert
Terminal / Connection TypeScrew terminal blocks
Wire Conductor Cross-Sections0.2 mm² to 2.5 mm² (24 to 14 AWG)
Housing MaterialPolycarbonate
Mounting FormatStandard 35 mm DIN rail (EN 60715)
Protection ClassIP20

Ambient Operating Temperature Range: -20°C to +60°C

Weight150 g
Dimensions120 x 110 x 22 mm
Country of OriginGermany
HS Code9032.89.00

Tarne ja tagastused

1. Tavaline kohaletoimetamine järgmisel tööpäeval (Madalmaad). Teistesse riikidesse võib kohaletoimetamine võtta kauem aega – mõnikord tuleb tellimuse kättesaamist veidi kauem oodata, kuid see on alati seda väärt!
2. Tagastamine: saatke meile e-kiri või helistage, et saada oma RMA-number. Ilma RMA-numbrita ei saa me raha tagasi maksta.

Miks osta meilt

Kuidas me eristume:

1. Oleme 100% Hollandi ettevõte, mille ladu asub Madalmaades.
2. Laos tähendab tõesti LAOS.
3. Kõik Used Industrial Parts kontrollitakse enne müüki lisamist.
4. Kõigil Used Industrial Parts toodetel on DOA-garantii ja 6-kuuline garantii.
5. Suurim laovaru! Ostame (ja müüme) iga päev „ülejäägina uusi“, „kasutatud“ ja „vananenud“ automaatikakontrolle ning tööstuslikke protsessiseadmeid, seega oleme uhked oma tohutu laovaru üle!

Vaata kõiki üksikasju